Attaching Roadie Coach to a roundback guitar or thin instruments like ukulele or electric guitars

Modified on Fri, 11 Aug 2023 at 03:52 PM

Roadie Coach comes with a ball-head pad specifically designed to support round-back instruments such as Ovation guitars. This pad is also useful in case your instrument is thin (electric guitar or ukulele) and the flat pad on a small clamp are not enough to hold Coach in place. 

To install the ball-head pad onto the clamp you would like to use, follow these steps or watch the tutorial video below:

  • Select the most appropriate clamp size for your instrument based on its width
  • If a flat pad is already attached to that clamp, use a flathead screwdriver to remove it 
  • Attach the ball-head pad to the inside of the clamp and use the plastic cap to screw it in place 
  • Peel off the protective film layer from the ball-head pad to uncover its adhesive surface 
  • Ensure the latch on the Roadie Coach is in the unlocked position and insert the clamp to the desired length 
  • Position Coach over your instrument, leaving a 1mm gap for easy closure of the latch
  • Secure the clamp by closing the latch



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article